CE Certificated Tansformers CT PT Casting Mold Mould Release Agent
for Electrical Insulators
TDS:
Performance parameters:
| Aspect | Unit | Value |
| colour and lustre | — | Transparent liquid |
| Viscosity | mPa.s | 15 |
| Flash point | ℃ | 65 |
| Spread rate | ㎡ | 20-25 |
| Density | g/mm3 | 0.90-0.92
|
Product Description:
JT 6101 Organic Silicon Mould Release agent
Features:
Good release effect
high stability
No reaction with the casting material
Not corrode the mold
Environment protection and without pollution
Process:
1. Remove grease and wax thoroughly with solvent to ensure the
mould cavity clean and dry
2. For the new mould, initial using need to spray for
3-4times(After the solvent evaporation and then spray brush
again),after that one mould to spray one time or several moulds to
spray one time(several moulds to spray one time: normally paint one
time after the mould poured 2～10 times)
3. When a thin coating can be formed on the surface of the mold
cavity by the method of spraying or brushing, then it is ok
Packing:
5KG/ pot,20kg/drum
Storage:
Products need to be stored in a dry and ventilated environment with
18-40℃, and the shelf life is 1 year
Hubei Plant and Guangdong plant:
ISO certificate:
Part of our customers:
FAQ:
1. We’re using Huntsman epoxy resin, can I use JiangTe resin?
Yes,ours are equivalent to Huntsman. Please tell the number of
Huntsman you’re using, we’ll offer the one matching.
2. What’s the pot life?
Pre-filled resin is one year; Pure resin is 2-3 years.
3. We’re just starting producing. Can you help us on the process?
No problem, we’ll offer guidance and support. We have thousands of
customer manufacturers in China and overseas.
So we have good experiences.
