Liquid electrical insulation epoxy resin casting resin for
medium&high voltage LBS, BUSHINGS, SPOUTS
Electrical Insulation Materials
Epoxy coating powder JT105 can be a useful material for electrical
insulation of wire and busbars, as well as high performance motors.
Here are some features and benefits of JT105 epoxy coating powder:
1.Electrical Insulation: Epoxy coating powder JT105 is an excellent
electrical insulator, which makes it ideal for use in electrical
insulation applications. It can help to prevent electrical current
from flowing through the insulation, reducing the risk of
electrical breakdown or short circuits.
2.Corrosion Protection: Epoxy coating powder JT105 is highly
resistant to corrosion, which makes it a good choice for use in
harsh environments, where exposure to moisture or other corrosive
substances could cause damage or corrosion.
3.Chemical Resistance: Epoxy coating powder JT105 is highly
resistant to chemicals, which makes it a good choice for use in
applications where exposure to chemicals could cause damage or
corrosion.
4.Mechanical Protection: Epoxy coating powder JT105 can also
provide mechanical protection to the wire, busbars, or motor
components. The coating can help to strengthen the components,
making them more resistant to bending, cracking, or breaking.
5.Customizable: Epoxy coating powder JT105 can be formulated to
meet specific performance requirements, such as low viscosity, high
filler loading, or high thermal stability. This makes it a
versatile material that can be customized to meet the needs of
different applications.
| Processing Methods
Conventional vacuum cast technology, mould temperature scope is
130℃–150℃, demoulding time is about 10-30min(different as per temperature
and volume). After cure at 140℃ and keep warm for 8h.
The demoulding time and after cure cycle need to be determined as
per specific product design and process technology. Please contact
our technicians for more info.
Product data (guideline values) | |
JT 8824A Liquid modified Epoxy resin | TYPICAL VALUES* | Viscosity@25℃, mPa.s[ASTM D-2983]
................................................................5000–12000
Non volatile component, wt%
[DOWM-101188-TE]...........................................................100
Density@25℃, g/ cm3 [ASTM D-1475]
....................................................................1.10–1.20
Storage life@25℃(sealed container),
month.......................................................................12 |
Remark: To avoid water absorption, putting epoxy resin inside
sealed container and keep at temperature 20-25℃ are suggested
JT 8824 B Pre catalytic liquid anhydride curing agent | TYPICAL VALUES* | Viscosity @ 25℃, mPa.s [ASTM D-2983]
.....................................................................300-400
Density @ 25℃, g/cm3 [ASTM D-1475]
..................................................................1.15–1.25
Vapor pressure @ 25℃, mbar ......………………………………………………………………………………...1
- 2
Storage life @ 25℃(sealed container),
month......................................................................12 |
* typical value can not be regarded as product specs
Remark: This hardener is sensitive to water. If water content is
high, which may change its reactivity, and finally change its
performance. It must be stored in sealed container and kept in
normal temperature( about 20–25℃). | |
