Voltage Transformers Epoxy Resin Used In Electrical High Voltage Power Insulation Products

TDS:

Industrial hygiene

When operating and processing products, must follow the industrial hygiene standards.

For more information, please refer to the corresponding safety data sheet and .

Operating protection measures

Workplace safety measures:
Protective clothing Need
Gloves Must need
Arms to protection May contact with the skin, Recommended
Goggles/safety glasses Need
Mask/dust mask Recommended

Skin protection:
Before working To exposed skin protection by cream
After washing Frost of besmear protective cream or nutrition

Contamination of the skin clean With suction paper wipe, wash with warm water and alkali free soap, With a one-time towel dry. Do not use solvents.

Clean workshop environment Use a light paper covering the table and chairs. Using a disposable beaker, etc. Spatter material processing Use sawdust or waste cotton silk blotting, and placed in a plastic woven baskets.
Ventilation:
To workshop Take a breath three to five times per hour.

To position Cover of exhaust fan. The operator should avoid inhalation of vapour.

PRODUCT NAME:
EPOXY RESIN FOR LBS, BUSHINGS, SPOUTS, MONOBLOCK, SWITCH GEARS, EMBEDDED POLES, INSULATORS



TDS:

Characteristics:

Strong adhesion

Good insulation

Good process performance

Good surface gloss and electrical resistance

Excellent moisture resistance

1. Appearance& Characteristics:

2. Mixing ratio: JT2051A/JT2051B=4/1(pbw)

3. Applicable time: 25-40mintus at 25℃( mixture: 100g)

4. Curing condition: 8-12h@25℃ or 6h@60℃, full curing takes 3days at Room temperature.

5. Process:

Mixing two components in a certain proportion and keep it for 10minutes, brush them to the iron core after the viscosity is increasing.

6. Properties:

7. Packing:
Component A: 24kg
Component B: 6kg

8. Storage

The product should be sealed in the original packaging container, stored in a dry and ventilated place to save. The shelf life is 6 months under 18~40℃ condition . If exceeds the shelf life time, it needs to be tested again to confirm whether it can be used or not.

Client Product:

Equipment used by customers:

Hubei Plant and Guangdong Plant:

ISO certifcate:

Part of our customers:

FAQ:

1. What’s the Pre-filled?
Pre-filled is the resin or hardener has been filled with silica sands before delivering to you.

2. Is Pre-filled resin cheaper than Pure resin?
Generally it is. However, you should consider the final cost. If you can find qualified silica sands in you local market, the pure resin is better choice. Silica sands are very cheap, sea freight cost is high. With same quantity of resin in a shipment, you can get more final mixed resin with local silica sands.

3. Why JiangTe resin doesn’t offer Flexibilizer and Accelerator?
We’ve added them into resin/hardener already before delivering to you. So you can use our materials easily

Established in 1998, Jiangte Insulation Composite Co., Ltd is high-tech enterprise engaging in the development, production and sale of electrical epoxy resin.

After more than 30 years of efforts, JiangTe has introduced a variety of electrical epoxy resin products which have been widely used in the manufacturing of dry type transformers, instrument transformers, medium to high voltage insulation parts and solid switchgears.

To provide the very best service, Jiangte has set up two production plants in Hubei and Guangdong producing more than 50 electrical epoxy resin line with an annual capacity exceeding eighty thousand (80000) tons. JiangTe is the most professional and the leading manufacturer of electrical epoxy resin in China.

JiangTe's two plants have received the ISO9001 quality system certification and ISO14001 environmental management system certification and are careful to meet all local and international health, environment and safety standards.

Additionally , JT has established a comprehensive Research and Development Center with a large selection of advanced testing equipment for their highly skilled research and production teams.